Fuyun | 2025 ATC car chassis displaying Shanghai Automobile Convention Center

Quality of energy tracking!

Fuyun's gold-spectrometry program is showing the Shanghai Car chassis, leading the new view of the PCB's failure analysis.

The three-day technical exhibition of the 205 Shanghai Car Underground System was successfully inaugurated at the Shanghai Automotive Fair Centre from 22 to 24 October.

During this industry event, which is centred on the chassis system, Fuyun Testing Technology (Shanghai) Co., Ltd., in the Automobile Chips Exhibition, the event was held in the capital city of the United States of America.

The only way to get a gold-speciored, full-process solution that will serve the PCB (printing circuit boards) reliability analysis is to show the most important of the world's most important aspects of the process.

A critical “quality eye” is provided to guarantee the reliability of the bottom of the electronic system for vehicles.

Today, the smartness of the car chassis is supported by the support of the bottom electronic hardware, which is a dynamic development of new energy vehicles and smart driving.

As the carrying matrix of the electronic system, PCB is directly related to the stability of the entire electrical control system, such as copper plating quality, the integrity of the hole wall, inter-screen integration.

Fuyun tests the gold cutter, the gold grinder, the diamond grinder, the diamond grinder, sandpaper, cold-smelted resin and a series of embedded PCB samples brought in this time.

It is precisely for the purpose of a precise analysis of these potential deficiencies.

Zero-one, close. Keep the point of no validity.

We have a gold cutter in front of a fragile, fragile PCB sample.Sliced and minimally damaged.Perfect balance.

Ensure that the original structure of invalidity is not destroyed during the cutting process and that the most real state of affairs is retained for subsequent analysis.

02 is a very sharp and sharp glitch, with a clear interface.

Utilization Diamond grinder and special sandpaper. ♪ And the gradients ♪ The Golden-Symbrane. Stable running,

We can handle the PCB.Cracky fabric and soft copper. The challenge is to make the most of the world's most vulnerable.

A perfect sample without scratches, tails and clear interfaces is produced.

Perfect cover at 03, fixed in small detail.

Pass. Cold-molecated resin The tiny PCB vents, slices, are filled with cold, stressless seals, and each of the tiny details that need to be observed is perfectly fixed.

Ensure that the results of the analysis are accurate. A well-set PCB sample. The amplitude of the cross-section is as bright as it is, attracting a large number of quality engineers and consultants.

Sensor.I'll meet you. I'll be in the service.

We are grateful to all our friends who have come to the Fuyun testing booth in the E5 chip area.

Your technical details and the approval of the solution are the most valuable driving forces on our way.

Although the fair was over, Fuyun tested the quest for technological innovation and the initial intentions of the client of the service remained unchanged.

If you were inPCB Non-Fulfilment Analysis, Electronic Device Test or Reliability Fields for any materialThe blogger says:

You're welcome to call us any time you want.。

Fuyun tests, with a specialty of gold, will make a solution for you to see micro, lock in quality!

The show is great.