Sample purpose: Tests of carbon decarbonity on edge of steel samples

Electronic metaware slicing, presentation: electron metaware slices and gold slices, cross-section, x-section, is a sample method of encapsulating samples with ad hoc liquid resin and then grinding polishing them.

The product delivered was two fully automated double-drive grinders and the associated consumables, and the customer was a manufacturer of electronic chips, and because the customer was the first time he tried to do a slice analysis, many problems arose at different points, and we were the ones that gave the client support to the counterpart and were eventually well recognized by the client.

Aluminium alloy anode-repletion-forming programme Samples Purpose: Crystal particle measurement of aluminium materials Materials: Pure aluminium + 0.2% Aluminium Plumbing Samples: Fuyun Testing Technology (Shanghai) Co., Ltd. Contact person: Zhang Jintian Contact Phone: 15990346569, Large raw materials need to be cut to facilitate the polishing of gold.

Metal plating defects in automobile parts - gold-phase sampling methods Textile Engineer: Chests: TEL: 15990346569 E-mail: re@fulwint.com 1, Materials: Basewood roughs, soft metal plating materials Hardness: soft detection category: observation of plating defects such as drum packs, gas holes, impurities, etc. 2; embedded pictures are shown in the following pictures:

Aluminium alloy grinding sample Samples: Fuyun Test Technology (Shanghai) Ltd. Sample manufacturer: Zhang Jin-in Tel: 15990346569 Sample product: Aluminium alloy grinding polishing one, sample picture: II, grinding: Fuyun utensils: 600 # 1200 # 2,500 # with condition to use 4000 # taped Fuyun machine: FYP-2 hand inverted grinder pressure: subject to fixed, moderate pressure stable, without too much pressure.Time: 1-2 minutes, the surface is flat, and the next one needs to be sharpened, grinding the upper one, grinding it off, turning the wheel: 200 Turn the grinding wheel: When the clockwise is grinding, pay particular attention to: two small metal pieces are heading down, not moving in one direction, and will not cause many scratches.Fluctuation: Fuyun utensils: Silk cloth/nibu 3 Micro-import material PV/ Silicon dioxide Pulp/cleaning Pulsion Brush: Silk cloth with 3 Micro-Fuyun machine: FYP-2 manual non-extremely-referral-rate-blowing pressure: fixed, subject to moderate pressure stability, without too much pressure. Time: 2-5 minutes, light sandpapers will almost be removed. Turn: 200 Turning direction: Timewise needles: during the polishing process: the polishing process requires early immersion, the polishing of the polishing fluids in the centre, and additional tipping points The wash fluid increases its lubricability.The amount of light: a little bright, scratched, and can move forward. Precision: the nibbles are blocked, with silic oxide polished fuyun machine: FYP-2 manually, without extreme-resort-to-scaling grinder Pressure: fixed, medium-stabilized, and without too much pressure Pressure. Time: 2-5 minutes, light-slice scratches are almost eliminated.Pleakers pay particular attention: two small metal pieces are down, and they stay in one direction, and they don't cause many scratches. They'll be polished in two minutes and then they'll fall back and up, down.