Sample company: Fuyun Testing Technology (Shanghai) Co., Ltd. Sample engineer: Zhang Jin-nang Contact: 15990346569 Solve the problem: measure large work surface lumber-hard gradient curve and product surface crystal-particle testing. Clients are currently having problems: tested with other miller, with different sides from grinding to polishing. Pressures are shifting in a small or back-directional direction, and the pace is slowing.If the pressure at the grinder centre is uneven, the sample will appear in multiple directions as a result of up and down. Fuyun solution: adjust the centre pressure to even it.

Aluminium alloy measurements Samples: Fuyun Testing Technology (Shanghai) Co., Ltd. Sample name: Zhang Jin, Tel: 15990346569 Samples: Aluminium alloy welding or multilayer aluminium Samples Purpose: Multilayer aluminium alloy measurements thickness such as recommended cold-saturated thickness of the edge of the polystorey alloy, acting as a reverse angle in protecting the edges during grinding one, sample pictures (multilayer welding)

Samples for the purpose of testing: welding point smelting, gas hole defects, welding size, etc. Sample images are embedded as follows:

The original sample is as follows: the contact point is small, and the first to be cut: a cuter is sufficient, a diamond blade or a silt-silver slab is possible.

The materials are as follows: The materials cut off the surface in an uneven manner, polished the polishing up more difficult, and were as slow as possible, or best managed to be embedded.

Product name: Low-multiple tissue thermal acid corrosion device Product type: FY-MH-100

Samples: Fuyun Testing Technology (Shanghai) Co., Ltd. Sampler: Zhang Jin-ren, Tel: 15990346569 Samples: Cyl alloys to grind polishing and corrosion