Sandwheel specification description                                                                                                                              

The range of grinder selections

Product size range

Sandwheel Shape Identification

Note: Because of the variety of grinding beds and the different processing requirements,It's got shape.

The required sand wheel order requires the provision of drawings for the sand wheel.

Goods, just provide the product number of the sander.

Grain range of sand wheel

The particle range of the ceramic sand wheel is generally from24# to 320#, common particle size46, 60, 80, 100 and 120#.

The choice of the particle size is based on the roughness to be achieved on the surface of the work, which is common.The particle size and the roughness of the surface are roughly the following.

Relates to:

At the same time, the particle size is associated with the area of exposure, and the same particle size is available if it is ground grinded or if the area of exposure is larger

Better light.

Synthetic Select

The combination of ceramic sand wheelV indicates. Different speeds, hardness and organizational structureCombinant formulations and code names, those.

No. We sell engineers or product workers when they choose to be a product.The curator gave the determination.

General milling in the general industry                                                          

The two types of grinding are used widely as the two most common grinding processes in the general industry.(WAor chrome jade ()PA♪ A grinder ♪   . Also based on roughness and the type of work material notSimilarly, the particle size and grinding of sand wheels can be adjusted.

Common dimensions and specifications for ground and outer round sand grinders

Special grindings in the general industry                                                          

The grinding of aluminum.

Aluminium is generally used to roll aluminum sheet and aluminum.Common material is:9Cr2MoAlloy steel. Aluminium luminum grinding is usually done by ceramic sand wheel.

Because   For the surface of the plaster, it requires a consistent and good light-purity, and in this case, ceramic sand wheels can achieve better stability than resin sand wheels.

Basic model of sand wheel       WA120   -H8V

The grinding of cast iron.

For cast iron materials such as grey-cap iron, ball ink cast iron and alloy cast iron, it is usually chosen to grind with a silide grinder.It's a carbonized silicon grinding.   Self-depletion is too rapid to be cut, and the size of the work is not controlled, so the sauna wheel is sometimes used to grind the cast iron.

  A common sand wheel type for cast iron compressor curves     AWA80   -L8V   or WA80   -L8V

Common sand wheel model for the caster diesel axle     PA70-L8V   or   SGB70-L8V

The milling of stainless steel works

For the milling of stainless steel works, single-crystal sand wheel is used."Stick," so it needs sharp cutting.   The blade's grinding.

  Basic model of sand wheel   SA60-J8V

When stainless steel works have a smaller diameter, you can use a green carbide silar wheel to grind. Because green carbide silon grinds have a good cutting power.

  Basic model of sand wheel   GC100-M8V

Powerful grinding.

Powerful grinding means that sand wheels grind in a way that is so slow.It's usually used for aerodynamic blades, carobus blades, turbos.   The sluices are formed and the machine-bed tracks are sharpened in large amounts.

Powerful sand grinder is usually a gas hole structure, which is designed to allow the cooling fluid to enter the ground effectively.Area, avoid burns and can accommodate metal scrap,     Avoid blocking the surface of the sand wheel. Depending on the conditions of the grinding, the type of gas hole can be designed to be a hole in the atmosphere.(Organization 12), mid-air hole(Organization number)   11) and micro-gas hole (organization number 10).

Here's the usual for engine blades, varnish and machine-bed guidance.Grid sand wheel model with force:

  A sand wheel model is common for engine leaves     P400X25X127   WA60-G25VCF2   or   3TG80-G10VXP

  A sand wheel model is common for machine-bed tracks     PSA600X100X250   WA46-H25VCF2   or   SA46-G25VCF2

Modular processing                                                                    

In electronics, cars, electric appliances, appliances, instruments, home appliances and communications, the government has been able to provide the most effective services to the public.60%-

80% of the parts are made of molds. We provide different types of molds.   ♪ Roughing products. For some of the cars, mainly steel. ♪

Plastics, construction materialsMoose, plain pot.   A chalk wheel can satisfy the requirements of its processing accuracy, such as grinding of tools, flatting of the♪ And the face and the round ♪   The main object of processing is the synoptics of the mold, the standard parts of the mold, such asMotion frame, guide to   And the top pole.

Also, for the processing of electron moulds,The new high-performance light sand wheel is being introduced.，The product has excellent shapes and sharpened stability.     It's not only very fine, but it's better to make a very fine chute.Bottom straight angle.

Axis processing

As modern manufacturing of cars, machine-beds and so on, the market is right.The demand for high-performance transmission devices is increasing, geometrically, and working It's getting more and more stable, and it's getting more and more so.

Manufacturing requirements require very high-level work.Racing precision. Eyes. The future of the axis brings the global lead in the milling of the entire processing industry.Case.

The highest demand for grinding is for the processing of axle bearings in manufacturing，OverwriteThe whole bearing manufacturing process, such as the bearings The end of the circle and the rolls is grinding, heartless grinding, the ravine of the inner and the outer circle, the inner round of the bearings, etc.

Unintentional sand grinder

Inner circle sand wheel

Mill selection

High-performance grinders.

TG:     The barbed-down ceramics are the most purified.Material removal capability and high-speed grinding applications   It's the best that can be done.

NQ:     Specially designed ceramics burn to the ground. They have special grinding and colding for all all alloy.It's a little bit more poignant. Especially when it's low-difficult.This is particularly good (e.g., internal rounding).

Traditional grinding

SA:     Single-chrystal. It's for thermal processing of hard-core alloys.Steel materials, especially residual removal, at larger locations.       PA:     Chroma. It's half-cracky and a little bit of resilience.   The sharpening power is between White and Single.Between Jades.   WA:   White Goon Jade. The most clenched in all the mills, which applies to alloys.Cut, cold-cut works very well.A/WA: Brown or mixed. It has the advantage of being durable. It can be used for less hard carbon steel.Rare, cheaper.

                                Common Models and Applications

Quantum(NQ) Inner round sand-mill processing

TGInner circle grinder small sand wheel

Automobile parts processing                                                              

Solutions can be widely applied in the motor area, speed and shift precision.

Engines are the most important link in the production and development of the automobile industry.And it has to meet low energy consumption, low noise and   Reduce pollution from emissions. And all of this and the quality of the parts and components that are processed.The measure and the precision are inseparable.

And adapt to today's market needs, and provide high standards for various milling applicationsQuite the product and the leading technology.   In the inner and extra-high-precision grinding of engine parts such as cams, curvatures, rads, gas doors, etc.

For the money.SG Sandwheel Energy   Helps the manufacturers of automobiles and parts and components to improve production efficiency and product quality and to reduce production costs.

  RECOMMENDED TYPE OF CUSTOMS FOR THE TURNING OF RESTS OF RILLARLY TURNING GAS

    1067X47X304. 8   19A60-MVH:   Mixed with Gonyu, for the curvature of the general requirement.

    1067X47X304. 8 PA54/WA60-M/LVH   : "Sweet sand wheel" has a more peg for the bottom corner of R.Great improvement.

    1067X47X304. 8 SGB54-LVH:   SG Sand Wheel, grinding performanceSteady, and less burn for work.

  Recommended standard model for sand-wheeling vessels with argon-axis

●         1065X25X304. 8 PA60-LVH   PA60-MVH

●         1065X25X304. 8 SGB60-LVHSGB60-MVH

*The selection of the above model will be determined on the basis of different application conditions.

  The French side and the outer vertebrae of the transfer axis are grinding.

YX 760X70X304. 8   19A80L/60-KVH

For the greater face of the French,     The gravitational size needs to be increased to avoid burns. And the sand wheel needs to be made into two layers to reach.   Different processing purposes.

    YX 610X95X304. 8 PA80/WA60-L/JV

For processing the outer and end parts, sand wheels need to be made into two layers of grinding to meet different grinding requirements.

Gear processing                                                                                                    

High-performance motors require a very high sharpening fineness of gear.   Such as the rim and the rim of the traditional sand wheel, the rim grinding, the grinding of the extruded, the grinding of the snails, the grinding of the umbrella, the grinding of the larvae, etc.

At the same time, various high-precision diamond restoration tools are available, such as:Diamond rollers, whole pens, etc. to meet clients   The same repair requirement.

It's a good idea to have a silhouette.

    400X45X127   3SG60-GH12VSP

StandardSG type sand wheel,   It'll satisfy most of the gear.The type grinding requirement.

    400X45X127   3NQ60-GH12VQNP

NQ sand wheel, performance similar to SG, on the medium modulus gear.Better grinding efficiency.

    400X45X127   3TGP80-G12VSP

TT sand wheel increased the cut rate by more than 50% compared to normal SG sand wheel.

    *The selection of the above model will be determined on the basis of different application conditions.

  The gear snail grinder model recommended

    For common gear grinding

350X104X160   SA80-JVS   or 400X100X203   PA80-KVS

    For high-speed gear grinding

220X180X76.   2   5NQ100-JVS or 220X180X90   5NQ100-JVS

The larynx is sharpened.

And you can put out the following with the Grissom umbrella moth grinder:Sandwheel SG model:

The size range available from7 to 22, with inventory in the standard series.   It is described as a system of government and can be subject to special regulation.

Rules for safe use                                                                  

Safety manual for sand wheel use

The incorrect use can cause damage to sand wheels and damage to operators.GB4674/GB2494. For your safety,We suggest you do.   Read the following guidelines carefully.

Sandboat handling

All sand wheels are relatively fragile products, which must be small when moving.Easy.

Save Sand Wheels

When retaining sand wheels, appropriate shelves should be provided for different types of products.

The ideal sand wheel storage.

Check in front of the sand wheel installation

Before being installed, check for potential damage or damage to sandboats by visual or sound, and check for the speed of rotation between the machine bed and sandwheels

Rules for safe use                                                                                                                                  

Installation of sand wheel

The correct step of the sand wheel installation is extremely important for the safe and effective use of the sand wheel.Yes, it is therefore important to ensure that the personnel who are in place to implement sandboats have a fairly professional operational level.

Use of sand wheels

Even sand wheels that meet the requirements of safety checks are safe in use and depend to a large extent on the actual use of sand wheels and the correct operating methods.

              Other matters

Fixing Tool

    Quality and correct correction tools should be selected to prevent the process itself from being modifiedQuality issues or   The unsound repair process resulted in the ineffective work of the sand wheel and led to a higher grinding temperature.

Cool

    The choice of the appropriate cooling fluid and the determination of reasonable cooling should be based on actual operating conditionsBut it's flowing to prevent it from grinding.   The temperature is rising.

Analysis of common problems with the explosion of sand wheels

After the disassembly of the sand wheel, the lead and useful information is collected in time for the first site and the breaker is provided   Re-assembled photographs, which would be of great help in properly determining the cause of the sand-wheel blast.The following figure details some of the types of analysis that followed the explosion of the sand wheel for preliminary determination:Reason.