Anti-collide, diskettes for grinders, polishers, manual gold grinders, automatic grinders, etc.

Specifications in diameter: 203, 220, 230, 250, 300 mm

Package: Anti-clask 5pcs/pkg; Disk 1pcs/pkg

Usage method

1. Cleaning up of pre-heaters, polishers, manual gold-phase grinders, aluminum or iron plates on the surface of the automatic grinder, oils and foreign matter, etc.;

2. To bind disks to the user ' s present-use mill, polisher, manual gold grinder, aluminium or iron plate on the automatic grinder, using non-dry glue on the following table:

3. To bind the polished or sandpaper to the top surface of the viscos (sliding, coating of residual impregnable glue, contact with the disk on the other side of the non-sludgery, using non-dry glue from the surface of the surface of the sandpapers or sandpapers that are currently used by the user;

If the polished or sandpaper loses its useful value, the polished or sandpaper is removed from the viscous disk from the gap, and because the viscous disk is coated with residual tape, it is easily removed from the polished or sandpaper without residual glue;

5. If the polish or sandpaper is reusable, it needs to replace the granular or polished type, remove the anti-clattering disk (with a polish or sandpaper on top) from the magnetic disk, and replace it with other anti-clattering disks (with polish or sandpaper on top of it with other specifications);

6. In order to protect the coating on the anti-clause disk, the coating shall not be exposed to hard matter.