MDC500 Colour digital camera 1

1. Pixels 1280 X 1024 over 5 million pixels, colour, 1/2-inch

Colour, target 1/2-inch, line-by-line scan

3. Maximum frame rate: 30f/s @ 640 X 480

4. Plug-in and automatic power control, powered through USB 2.0 interface

Survey system software

1. Provide high-resolution colour images of pixels exceeding 5 million pixels;

2. Images are transmitted rapidly to computers, which regulate the brightness, contrast, etc. of images, and preserve them in compressed formats;

3. General geometry parameters on the measurement of images

1. Two points away;

2. The diameter of the circle;

3. The diameter of the circle at three points;

4. Radians;

5. Perspectives;

6. Add a narrative;

7. Distance from point to line;

8. Distance of two parallel lines

4. Any measurement area may be modified

By selecting the measurement component, each measurement graphic can be modified at will, each component of the measurement graphic modified; any measurement graphic moved, deleted

5. Customizing for specific parts, such as for the copper industry, facilitates the measurement of all tooth parameters and statistical analysis.

6. Statistics and automatic generation of parameter measurement reports, automatic technical CP, CPK values;

7. Attaching tics to the image, with a magnification multiplier always determined;

8. Print images in real or random magnifications.

V. SPECIFIC PRODUCERS: 1) GINGY CLIMBING MACHINE 2 3) GING SHIPPING GYM PLOWER 4) GING SILVER (import and national production)

VI. SERVICES AND MAINTENANCE

Quality assurance period: 12 months from the date of acceptance and acceptance, for equipment to be on warranty and for spare parts to be provided on a permanent basis.

VII. Packaging, transport, technical support

1. Packaging: The supplier ' s packaging shall ensure that the equipment is not rusty, injuryless or damaged during transport.

2. Duration of delivery: 10 working days for delivery.

3. Transport: The supply side is responsible for the safe transport of equipment to the demand side site.

4. Installation debugging: The supplier is responsible for technical support in the installation, commissioning, etc. of equipment.

5. Training: the supply side is responsible for the full range of services (operation protocols, computer software operations, troubleshooting and maintenance, etc.)

Technical training, technical support until the training of trainers.

VIII. ACCOUNT AND OVERSIGHT

1. Documentation:

The supplier is required to provide all relevant information, such as technical documents, certificates and the like, to the demand side at the same time as delivery.

 The supplier is required to supply the demander with a set of plant-design certificates, which will provide operational protocols, and the supply side with a list of the required equipment.

A set of maintenance instructions for equipment.

VIII. Quality assurance period:

1. The quality assurance period is 12 months from the date of final acceptance by the demand side.

2. The normal use of the product during the quality assurance period raises any quality problems (non-anthropogenic operational errors) and the supply side is responsible for the free peacekeeping replacement of damage items.                                      Purchase of well-known clients

3. During the quality assurance period, when the supplier receives notice of a failure on the demand side,

The general problem is resolved within one day and the major problem within three days.

4. In the event of a material loss to the demand side as a result of a major failure (un-anthropogenic error) of equipment during the quality assurance period, the demand side shall have the right to claim compensation and the supply side shall respond positively.

5. Maintenance beyond the quality assurance period, if required by the demand side, supply-side build-up

Extreme response; supply responsible for the paid supply of spare parts and life-long technology                 

Services, for which the supplier only charges a fee.

Settlement of matters not completed by friendly and negotiated settlement between the parties

Contact: 021-61905265