Official hotline：021-61905265

Current location： Home > Product Center > German imports of gusa products > The gold is embedded. > TECHNOVIT EPOX

TECHNOVIT EPOX

Product Introduction

TECHNOVIT EPOX（For pyrotechnics）

The choice of a solidifier affects the time of solidification, the time of movement, and especially the temperature load.To achieve a good effect, a precise mix must be maintained. Technovit EPAX is used at a ratio of resin to 2:1 weight of solidant. Solidification takes about 10 or 18 hours depending on the solidant composition used and the amount of epoxy resin used, which can be sequestered in the oven or refrigerator to adjust the speed of solidification.

Product Advantages

Performance and Applications

✪It can be applied in a vacuum

✪It's transparent and sticky to the work.

✪UV light is stable.

✪Solidity time is flexible.

✪It's good to be permeable.

✪Fast solidifier, almost halved.

✪It can significantly reduce the time of solidification and increase the ultimate hardness.

Technical Specifications

Technical specifications

	General solidification	Quick Solid
Colours	High Transparency	High Transparency
Purpose	Embedded of porous materials	Embedded of porous materials
Group	Chew/ General solidifiers	Chew/ Fast solidifier
Mixed ratio[Weights]	2:1	2:1
Smash Time	About1 hour	About1 hour
Yes.22°C solidification time [minutes]	18 hours	Ten hours.
Peak temperature[℃]	65	144
Stink hardness[MPa]	78	79
Density[g/cm]	1.13	1.13
Water intake[% by vol]	0.6	--
Linear contraction rate[%]	0.9	0.8
Volume contraction rate[%]	1.3	1.1
Refraction Rate Mono/Pomers	M = 1.5539 P = 1.59	-- --
Storage temperature[℃]	25	25
Valid period[year]	2	2
Lin. TCE	37–62 x 10 -6

Packaging specifications

Technivit Epox epoxy resin

TechnovitEpox Rapid Sorbent

TechnovitEpox General Sorbent

1000g

5000g

500g

5000g

500g

5000g

Download

Download Materials：

Order

Thank you for your attention to Fuyun products and solutions! Please fill out the following form to make us aware of your needs.

Marked*- You're not gonna get it.

Product Type*
Laboratory Type/Application*
Samples/Week*
Name*
Company*
Department
Email*
Phone*
Fax
Other
Submit Message Reset Message