✪Cross-crystal corrosive specimens can be bent 180 or 90 degrees according to national, Euro, USTM or ISO standards.

✪A 180-degree curved specimen can be convulsed in a form without a secondary pressure. After the specimen is convulsed, the head is automatically separated from the sample, and the sample is easily removed, thus increasing efficiency more than the normal cross-crystal sample is convulsed in a manner that allows it to be more easily achieved.

✪The bending power ensures that the convulsion of aerosol corrosive samples 5 mm thick, 25 mm wide, is satisfied.

(b) Low speed: 110 mm/minute;

✪The machine is of a stand-based type, with stainless steel on the working table, and the upper (capped) and lower (lower) moulds are made of high-intensity alloys, which allow for the simultaneous bending of two samples of the same specification, either U or L.

✪The equipment is operated with a limited-spaced work schedule to ensure the safety of the equipment, the use of aluminum alloy masks, and aesthetic and safety-protective effect in case of an accidental impact of a sample impact on the injured person.