Fuyun Test FALPHA-CUT150 Cracker: A fine choice of high hard material and thin plate

The gold-ray sample preparation is the first process of material microorganism analysis, and cutting links directly determine the flatness and integrity of the surface of the sample. If cutting is not sufficiently precise, subsequent grinding and observation will be half-fried.FALPHA-CUT150 CUT CLIMBER• The precise development of a full-container structure, super thin cutter compatibility and gravity to three main designs, providing reliable solutions for the precision of high-hard and thin-board materials such as glass, circuit boards, rocks, etc.

All sealed, safe and clean.

FALPHA-CUT150 is designed to be completely closed, cutting is done under a shield, effectively smothering the tatters and cutting fluids, protecting the safety of the operator and keeping the working environment clean. Equipment is equipped with touch screens showing a flash switch and a break, and emergency brakes are used to make the operation more comfortable.

Six core strengths

Full closed structure - safe protection parallel to clean processing

Cutting is the most risky and the most dangerous of the gold-forming."Dirty."The high-speed rotating slices, with metal cutters, grinding dust and cutting fluids, threaten the safety of operators and contaminate the laboratory environment if they are exposed to air.

FALPHA-CUT150, which is designed to be completely closed, completes the whole cutting process under a protective shield, separating the spill of the crumbs and cutting fluid from the root cause; and, in conjunction with the touch screen operation and the abrupt shutdown, operators can complete the full processing without having to face high-speed cutting sheets. Closed cavities provide a stable environment for the automatic recycling of cutting fluids - cuttings in the water tank are continuously recycled, colds are sufficiently and equally spread, and the cutting heat is effectively inhibited from damage to the specimen tissue.

Support for ultra-screeching - save, precise, low-intensity damage

The thickness of traditional cutters, the wide slits and the material is particularly unfortunate for valuable samples. FALPHA-CUT150 supports only the thickness of the use0.4mmThe diamond cutters, which compress the width of the cut to the extreme:

• Reduce material losses significantly(a) Especially for precious materials such as precious stones, rare metals and electronic components, with one cut and one cut less utilisation;
• Cutting the surface evener.(a) Smash in small resistance, slit in light and reduced subsequent grinding;
• Small heat impact area(a) Superslave, with full cooling, reduces the impact of cutting heat on material tissue and brings the specimen closer to the actual tissue state;
• The scalding is very close.: For high-hard thin sheet material, deformations and falls during cutting can be effectively avoided.

The hyperscaliber cut is extremely demanding for the accuracy and smoothness of the main axis of the device."It's a steady and accurate cut."。

Six packages, very general - Alien samples can be stabilized

Sample shapes vary widely: block, cylinder, long bars, thin, alien, small parts ... If each sample is customized for a special kit, it is time-consuming and expensive.

FALPHA-CUT150Six sets of clamps.In this case, the coverage of common sample forms, with a universal design that allows samples of different shapes to be quickly and steadily positioned. The holding of reliable samples is a prerequisite for cutting location accuracy - only if the sample is fixed and the cut location accuracy 0.01 mm can be actually realized; and, by avoiding frequent custom-made and replacement processes, significantly increasing the efficiency of sample preparation in many varieties.

Large-scale cutting platform (optional) - Large-faced material processed

FALPHA-CUT150 is optional.Large-sized lineboard cutting platform, provide a sufficient and smooth surface for large size samples:

• (a) Wide, stable and large-faced samples are not deformed and fall-off-prone;
• Designed for large-scale sample scenarios such as circuit boards, glass, thin sheeting, etc., and can be cut at once;
• The selection is configured on an as-needed basis, taking into account the cost of the equipment input and the actual processing needs, and flexiblely adapts to the operational structure of different laboratories.

Scorched diamond saws - specializing in high hard materials

The stinging of diamonds is one of the most hard-core materials in nature, and the sintering of the diamond saws firmly anchors the particles of the diamonds on the ground through the sintering process, forming sharp and grinding cutting edges, isHigh hard, high-fry material"Krypton."：

• Mass coverage(a) Accurately cut all hard materials, including glass, circuit boards (composite-based booster materials), rocks, hard alloys, etc.;
• Exactly cut and long life.• The scalability of the blades of diamonds is far more purified than the normal sand-crays, and the continuous processing of them will maintain a steady cutting capacity;
• The quality of the cut is good.: Great control of the fall of hard hard materials and cracks, which provide a good basis for follow-up grinding observations.

The formula 150 x 12.7 x 0.5 mm (6 inch) of the diamond cut, which is compatible with the super thin sheet matching programme, can find the most suitable cutting configuration from conventional hard to fine thinboard.

Limit switch + Gravity fine-to--unguarded, even

FALPHA-CUT150 uses two designs to solve this problem:

• Limit switch, auto-stop.: Devices with limited-bit switches, cut automatically stop when the position is set, and can be achievedUnguarded processingOne person can take into account multiple equipment and release a large amount of manpower;
• Gravity fine-to-plug.: Generate constant progress-to-power power through a coded component, using gravity principles to fine-tune the speed of the movement-to-generation of the processed object. The force of progress is always flat and flat, and does not change the way the operation works, so it is completely eliminated."Shake your hands."The resulting cillation of the quality of cuttings is both protecting samples and extending the useful life of saws.

The triple security folding of the flat, position-specific (0.01 mm), automatic stoppages, which stabilizes and repeats each cut -- that's where the most important value of precision-forming equipment is.

Application area

FALPHA-CUT150, a pre-processor of materials micro-organism analysis, hardness testing and other analytical sets, based on extensive material-adaptability and precision cutting, in the industrial manufacturing areas of steel, car parts, space, microelectronics, railways, electricity, etc., as well as in the Institute for the Scientific and Technological Detection and in specialized institutes of materials.

Steel and metal metallurgyThe gold phase of the tissue assessment, the analysis of the groceries and the decarbonation tests of the steel material require a precise and flat sample of the rods, plates, and models. CUT150 can steadily cut high-hard steel, cut the mouth and do not cause overheat damage, and provide a qualified sample for subsequent grinding and micro-observation.

Automobile parts manufacturingKey parts such as engine parts, gear gears, bearings, and fast-fixing components need to be cut in point sampling at different locations in production and failure analysis. The six packages are designed to easily bind different alien structural parts, to help mass and failure analysts quickly locate defects and reduce the failure mechanism.

AerospaceThe CUT150 sintering diamond sawing and ultra-screeching programmes minimize the heat effects of cutting and material depletion and protect valuable test items.

MicroelectronicsLineboard, chip wrapping, electron metrware, etc. cut, is a CUT150 good scene. 0.4mm Ultra-Screen Cuts Small, Small Threads, Small Threads, Large-sized Line Line Lines Line-Screeching Platform (option) is more capable of processing large-scale circuit boards for the purpose of providing good cross-section samples for failure analysis, gold-speculation.

Railways and electricityThe quality and safety of the controlled materials are subject to a gold-phase test. CUT150’s unguarded processing model allows for more efficient and effective batch and continuous sample cutting.

Institute of Scientific Testing and Higher EducationThe CUT150 kit is of high general, operational and accurate quality, and meets the scientific requirements for quality of cutting and high-frequency use of teaching and daily testing.

About Fuyun

Fuyun Testing, located in the Kachin City, Kachin County district of Zhejiang Province, has a high-intensity industrial park, 1237. It specializes in the development and production of materials and the preparation of materials for the production of fine materials and equipment for the preparation of a prototype of analytical technology packages such as metalliance, hardness, test machines, spectrum, and environment. It also works with well-known foreign brands such as Gutha, France, Langplen, and Orínbas in Germany, with a strong scientific and technological capacity and full production detection equipment, and is committed to providing professional, reliable analytical and testing solutions for industrial and material production.

We are welcome to contact us if we need to know more about products or about customized options.