What's the choice of the new Austrocin crystallity?

New type of crystal-particle impregnator for austro-creature, metallic flow lines, dialysis displays for steel, meeting the GB/T 6394, ASTM E 112 standards.

(b) Alternative saturated acid reagents, free of bitter acids and free of explosive-prone chemicals;

(b) The non-requirement of secondary thermal treatment and direct ingestion will show the original austrocin crystallines of carbon steel, alloy steel, and increase the efficiency of detection;

Weak corrosive, low toxicity, safe use.

Tickets are available and transport is unregulated.  

Easy to operate, fast.

Usage method

The test sample for the detection of the austropine crystals of iron-inline steel is no longer required to heat the material in accordance with the GB/T6394-20 Appendix A method for thermal treatment of the actual crystallity of the product.

2. The reagent occasionally has a smoothing of a suitable solution before the crystal is used into a cup;

3. The sample test surface is sharpened and polished and immersed up in the solution;

4. Heated to 60 ~ 90 °C, corrosive 1 ~ 10 minutes, and observed colour changes in the detection surface;

5. When the detection surface is darkened, the water is removed for washing;

6. The black and grey material on the surface of the detection surface is removed after the light discharge of 1-10S with water on the polished canvas;

7/ Microscope observation, if the crystal boundary displays indistinctness, to repeat the above steps until the crystalline is shown;

8 This product can be added directly when the evaporation of the impregnated agent is reduced.

Note: Save the light! The bottom of the bottle will be crystal smooth before it's used!