What's the choice of the sliced cold mosaic?

I. Why would cold-stained resin bags be needed for burial?

The samples analysed in slices are mostly irregular and small, and are not easily embedded with the gold needed for grinding, which is actually a form of standard embedded samples that are demouled by liquid resin landfills in a fixed silo, and which are demouled by solidification of liquid resins. To achieve reduced heat-smuggling pressure and high temperature destruction of the sample structure.

II. Why does it need cold-skinned?

Many of the samples analysed in slices are sensitive to temperature-price and reduce stress damage, so the choice of cold-coated is a better option.

iii. Why are cold mosaics of different types?

As the slice analysis becomes more widespread, cold-skinned burial is an integral part, but the requirements for cold-skinneding are different in the sample type and different performances. Fuyun has made the following five cold-skinned resins for the samples used on the market.

One, Cold-Stealed King

Colour: Transparent

Validation time: 10-15 minutes

Features: The Accle system, high hardness, high transparency, and the pressure glycerine is usually used for rapid solidification or requires a large sample preparation requirement.

Application area: High transparency, good mobility and permeability apply in particular to PCB and other electronic components. They are particularly suitable for embedding samples with fast-forming requirements.

Zero Oxygen Fast.

Colour: Transparent Yellow

Validation time: 25-40 minutes

Characteristics: Ethylene resins, rapid solidification, better mobility, better chemical properties, adhesiveness, low constrictiveness and high transparency, and better marginal resolution.

Application area: The seamless mosaics used mainly for metal samples, such as casting iron, steel, copper, copper alloy, aluminium and aluminium alloy, nickel-based alloy, titanium and titanium alloy, hard-form alloy, are particularly suitable for the mosaicing of samples with fast-forming requirements.

Three, low viscosy epoxy.

Colour: High Transparency

Solidification time: 3-4 hours

Characteristics: epoxy resins, low constriction, high permeability, no odour, environmental protection.

Application areas: The seamless embedding of metal samples, which are mainly applied to multiple holes, micro-pores, layers of structure. Examples are found in casting iron, steel, copper, copper alloy, aluminium and aluminium alloy, nickel-based alloy, titanium and titanium alloy, hard-quality alloy, heat spraying, metal plating, etc.

4-Low Heat epoxy King

Colour: Transparent Blue

• Validation time: 20-24 hours

Characteristics: Ethylene resin, low contraction, low fever, non-odour, excellent mobility.

Application area: Coming temperatures below 90 degrees are used in the armosensitive and pressure-sensitive material industries such as semiconductors, microelectronics, medicine, photovoltaics, micro-sizes.

Crystal King 5.

Colour: High Transparency

Validation time: 20-30 minutes

Characteristics: Polyester resin, efficient solidification, super-high transparency, rapid testing requirements, and good polishing.

Application area: Transparent and clear embedding is necessary and samples need to be rapidly monetized.

Remarks: If greater transparency is required and bubbles are reduced, vacuum mosaics or pressure pots can be used, as follows:

Vacuum mosaic I:

Pressure pot graph 2: