How do you match the gold-forming set? Fuyun Testing Fulwin Sample Device Configuration Guide

The gold sample preparation is the core process of material analysis, gold-phase observation, hardness detection, and failure analysis, and whether the sample equipment mix is regulated, directly determining the quality of the sample and the accuracy of the test data.Cut sampling, sample mosaicing, grinding polishing, corrosive aids, microdetectionThis document is a combination of Fuyun testing Fulwin, which is a self-study gold-phased system, and details the standardized laboratory mix, the appropriate enterprise quality check, the scientific research institute, and the third-party testing agency.

First process: a combination of gold-cracking equipment

The first step in gold-formulation is to obtain a successful specimen, avoid heat damage and deformation, and is a prerequisite for ensuring the quality of the follow-up sample. Fuyun Fullwin, a gold-cutting machine, covers the first-door, manual, hand-to-hand, and precision pulse cutting, and adapts to different samples, such as ordinary steel, large parts, hard alloy, ceramics, thin plating, semiconductor pellets, etc.

• FY-QG-65 Desktop Gold Cutters: conventional carbon steel, general sampling of non-ferrous metals, value-for-money type, self-carrying cooling systems;
• FY-QG-80SZ hand-to-hand, hand-to-hand, close cutter: Touch screen control, slash velocity adjustable, suitable for mass mass mass checking, and reduction of burn deformation;
• ALPHA-CUT2330 Pulse Creasing: laser positioning, pulse cutting, design for ceramics, crystals, hard-crystals, and reduction of the cutting stress; with Fuyun diamond cut, resin cut, cooling lubricant, cutting, continuous cooling and lubrication throughout the entire course, retention of material raw gold-phase tissue, and provision of a suitably tan-skin test for embedding and grinding.

II. Second process: the gold-phased equipment mix

Fuyun Fulwin covers thermal and vacuum-cooled routes:

• FY-XQ-200 Full-automatic smart thermal mosaics: smart temperature control, automatic pressurization, constant temperature protection + fast water cooling, 3-15 min in form, support φ25/30/40/50mm multi-spectrum moulds, equal sample formation, low air hole, no layer, high batch consistency;
• FY-VM-II Vacuum Embedding: For porous materials, estranged specimens, heat-sensitive deformation samples, vacuum-drying resins, air bubble elimination, and sem mirror samples;

III. Third process: grinding polishing equipment mix

Fuyun Fullwin is a rich, manual, semi-automatic, fully automatic matching:

1. (a) Teaching at the institution, small batch samples: FYP-1/FYP-2 single/dual plate no-class manual grinder, simple and cost-friendly;
2. Plant mass check, daily batch check: FY-MP-100 Full Autobroader, 8-inch touch control programming, single point pressure, 1-6 samples synchronized;
3. Third-party laboratory development, high-end testing: FY-MP-200 Double Disk Full Autobrace, Program Storage, Auto-Sequence Control, Extra-Auto-Diplomatic Diplet System, Thin, Crough, Crude, Crude-Brush Process, with Gold-Small Paper, Fowl/ This Fowl/Fowlless Flour, Goldstone Photojet, Aluminium Oxygen, Sequence-Struct, Stable, Stable, Stable, Scramble-free, Undisturbed, High-Standed Test.

IV. Auxiliary sample + end-detection device mix

Full gold-phase laboratory, with a mix of fuyun corrosive, observation, hard-dip equipment, in addition to the core sample host, and accessSample corrosive microobservation hardness testIntegrated processes:

1. EP-06 electrolytic polishing corrosors: stainless steel, aluminium, copper, non-ferrous metals, electrochemical corrosive polishing, non-mechanical deformation, replacement of strong acid manual corrosion, and repetitivity;
2. (a) The FY-MMD series of gold microscopes: FY-MMD-200, positive teaching, FY-MMD-500, reverse research microscopes, which support the measurement of light field, dark field, light, digital imaging, gold phase software, detectable seepage, decarbonation, plating thickness;
3. (b) Once the specimen has been polished, the gold tissue analysis, failure determination, material testing, and research and development validation are conducted directly to meet the requirements of third parties for the submission of CNAS detection reports.

V. Recommendations for different laboratory packages

Programme 1 Teaching laboratories (economic)

FY-QG-65 Gold Cutter + FY-XQ-2B Manual Embedding + FYP-2 Manual Double-Driver + FY-MMD-200 Positive Gold Microscope Characteristics: economic practicality, operational visualization, meeting practical teaching, student gold base experiments.

Programme 2 Plant Quality Examination Laboratory (Stabilized Volume Production)

FY-QG-80SZ hand-to-hand cutter + FY-XQ-200 Full Automation Embedding + FY-MP-100 ATM + FY-MMD-300 Rewind microscope + Depletion kit Characteristics: Operating stable, parameters solid, suitable for daily inspection, heat-processing sampling, welding.

Program 3 Third Party Testing / Research and Development Laboratory (High-end Standard Model)

ALPHA-CUT2330 Pulse Scrap Scrap Scraper + FY-VM-II Vacuum Embedding + FY-XQ-200 Thermal Embedded + FY-MP-200 Double-Drive Full Autobolic Palleter + EP-06 ELECT-Corrosion + FY-MMD-500 Inverted Gold Microscope + Micro Hardness Scale + Full-Screen Fuse Features: Efficient, High-Coherent, Compatible and Complex Samples, High-Specific Tests, Dismantling Analysis, Scientific Research Project, Support for Standardized Reporting by Detection Agencies.

Summary

Fuyun Fullwin (Fuyun testing techniques)Full gold phase sample host + full-system package + sample process guidance + installation debugging on door + after-sale technical supportA one-stop, holistic solution that assists enterprises, institutions of higher learning and testing institutions to develop a standardized, stable and re-emergible gold-sync testing system.