The cold mosaic is a crucial step in the preparation of the gold sample, and the embedding of the moulds and the sample frame (samples) is the core condensed consumption material used to fix the specimen, complete the cold mosaic, and is widely used in laboratory scenes such as metal material detection, PCB slice analysis, and thermal gold treatment.

Fuyun cold-laying emulsions are divided into two categories: reusable molds and one-time molds. The reusable ones include silicone molluscs and POM hard-quality moulds, siliose glucose molds are flexible, solidified and demouldered, and can be used repeatedly and repeatedly, with round, rectangular and multi-spectrum specifications, and fit samples of different sizes; POM hard-models with a lid, which are not deformed in a rigidly high degree, and suitable for testing scenarios requiring high-level fineness for the sample. The one-time cold emulsion emulators are PS plastic retrospectation, which are used for PCB gold-sty analysis, one-time use without PCB gold-styping, and bulk-based sample efficiency, half-sized, full-size, and line-scripting needs.

Many thin, thin, untraceable, and easily dumped, and directly embedded, can easily be dumped and the profile cannot be properly observed. The sample is divided into plastic and stainless steel. The sample is divided into a slab of steel, which is attached to a stylized structure, which is anchored vertically inside the mould, ensures that the sample is made to face up after solidification, and allows for subsequent grinding, polishing, microscope observation, and a special frame for the stubble of the sample. The plastic sample is supported by three Q-type support structures, transparent, black and optional; the non-stainable steel sample is firmly contained, resistant to corrosion and suitable for long-term repeated use.

Demobilizers are also used with embossed emulsions and bottled liquids, sprayed on the inner walls of the emulsion before making the sample, preventing mosaics from being glued, distilled, protective molds, extended endomen, thermal embedding and cold-membores.

Product application advantages

1. Forming: Modelled, frozen, tidied resin solidified and purified with a gold-coated sample block, which allows the subsequent grinder to be worn.

2. Protection of the edge of the sample: Packing small, fragile samples in order to avoid the drop or fall of the sample during the sampling process.

3. Smash: The sample pack addresses the problem of the slides, stabilizes and ensures the integrity of the observation profile.

4. Multi-species fit: model size, round, rectangle option, repeatable molds suitable for routine detection, one-time molds suitable for PCB slice mass testing.

5. Upgrading sample efficiency: Simple demodeling, quick operation, and making laboratory gold-forming more difficult.

Fuyun Fulwin has a gold phase that is fully embedded in the utensils, moulds, sample clips, demodulants, ready supply, fit for the major brands of cold-silver resin, and supports the bulk purchase of laboratory gold.