Official hotline：021-61905265
CN
CNEN
×
Current location： Home > Product Center > Sample Embedding Device > Annexes and consumables > Cold-mixed resin

Cold-mixed resin

Product Features Technical Parameters Download Order Related Videos Related Optional Products
Cold-stained resin: is commonly used in the protection of samples from heat and pressure. The sample is fast and stable.
Product Advantages

✪The properties of stable, stable, low-breeding, long-term storage of non-change colour, high hardness, and altrate-resistant properties, are at room temperature.

✪Tasteless, fast-determining, surface flat, high transparency, no bubbles, low viscosity, good permeability, low heat and low contraction.

✪The pressure pot or vacuum mosaicer is better.

Technical Specifications
Product NameModelCharacteristicsColoursSolidification requires temperature and timeTemperature limitStink hardnessGroupMatchPackaging&Volume RatioPyrotechnicsApplication area
Cold-molecated resin211002800The Yaklisi system, high hardness, high transparency, and the pressure glyc resin are usually used for rapid stabilization or require large sample preparation requirements.Transparent25°C &10-15 minutesMaximum 100°C90Powder/Low10:081000g+800ml&2000g+1600ml   2：1In the pressure pan.High transparency, good mobility and permeability apply particularly to PCB and other electronic components.
Cold-molecated resin2110028000UV resin, high hardness, high transparency, time-appropriate adjustment for photo-conservation.Transparent25°CMax. 80°C90Liquid/1000ml UV photo fixerHigh transparency, good mobility and permeability apply particularly to PCB and other electronic components.
Cold-molecated resin2110028000The power is extremely good for electrolysis or electrolysis of photocorrosion.Transparent25°C&Ten minutes.Max. 80°C90Powder/Low/1000ml+500g 2：1UV photo fixerHigh transparency, good mobility and permeability apply particularly to PCB and other electronic components.
Cold-molecated resin211003500Ethylene resins, rapid solidification, general mobility, environmental protection, provision of better chemical properties, adhesiveness, low constrictiveness and high transparency, with better marginal resolution.Transparent Yellow25°C&25-40 minutesMax. 110°C84Liquid/liquid2:011000ml+500ml 2：1In the pressure pan.Suture-free mosaics, such as casting iron, steel, copper, copper alloy, aluminium and aluminium alloy, nickel-based alloy, titanium and titanium alloy, hard-quality alloy, which are used primarily in metal samples, and are particularly suitable for those samples with fast-form requirements
Cold-molecated resin211004300Ethylene resins, rapid solidification, high mobility, environmental protection, better chemical properties, adhesiveness, low constrictiveness and high transparency, with better marginal resolution.High Transparency25°C&3-4 hoursMax. 80°C80Liquid/liquid4:031000ml+300ml 10：3Pressure pan/vacuum mosserThe seamlessly embedded metal samples are used primarily for pore, micro-pore, multi-layered metal samples. These are found in casting iron, steel, copper, copper alloy, aluminium and aluminium alloy, nickel-based alloy, titanium and titanium alloy, hard alloy, heat spray, metal plating, etc.
Cold-molecated resin2110043000Ethylene resins, rapid solidification, high mobility, environmental protection, better chemical properties, adhesiveness, low constrictiveness and high transparency, with better marginal resolution.High Transparency25°C&6-8 hoursMax. 70°C80Liquid/liquid4:031000ml+300ml 10：3Pressure pan/vacuum mosserThe seamlessly embedded metal samples are used primarily for pore, micro-pore, multi-layered metal samples. These are found in casting iron, steel, copper, copper alloy, aluminium and aluminium alloy, nickel-based alloy, titanium and titanium alloy, hard alloy, heat spray, metal plating, etc.
Cold-molecated resin211005300Ethylene resins, low constriction, low heat, no odour, excellent mobility.Transparent Blue25°C&20-24 hoursMax. 50°C79Liquid/liquid1000ml+300ml 10：3Pressure pan/vacuum mosserComing temperatures below 90 degrees are used in the heat-sensitive material industry, such as semiconductors, microelectronics, medicine, photovoltaics, micro-sizes.
Cold-molecated resin211006050Polyester resins, efficient solidification, super-high transparency, rapid testing requirements, and good polishing photolysis performance.High Transparency25°C&20-30 minutesMax. 115°C79Liquid/liquid1000ml+50ml 100：1.8In the pressure pan.It's necessary to have a transparent and clear mosaic, and the samples need to be fast mosaic.
Order

Thank you for your attention to Fuyun products and solutions! Please fill out the following form to make us aware of your needs.

Marked*- You're not gonna get it.

  • Product Type*
  • Laboratory Type/Application*
  • Samples/Week*
  • Name*
  • Company*
  • Department
  • Email*
  • Phone*
  • Fax
  • Other
  • Submit Message Reset Message