The first level of cutting is in the gold-phased sample process. The appropriateness of the cut-off tablet selection determines whether the sample produces heat damage, cracks, tissue deformation, and subsequent grinding, corrosion, microobservation and failure.LWA series gold-cutting film• A high-intensity resin matrix combined with high-quality and modified grinding to provide a sharp, grinding-resistant and long-lived cutting solution for the laboratory.

I. Why is the cutting so crucial?

The Golden Cut Request"Cut it right. Cut it clean."• Fast-track the opening of the work and minimize the heat-impact layer, ensuring that the specimen does not change the tissue of the matrix after cutting. Once the cutting is too hard, the binding agent is weak or the grinding grain is not reasonable, the following problems can be identified:

• (a) The sample is burned, oxidized and covered up with real tissue;
• (a) Cutting edges, cracks, thin walls or small pieces of small pieces, which are directly invalidated;
• Excise blades are worn quickly, sands are severe and frequent changes affect efficiency;
• The cutting is highly vibrating and the parallelity is poor, increasing the subsequent levelling of the work.

Fuyun LWA series is designed around this pain point, and it's directed atHV <375 Non-iron-based non-ferrous metal materials(e.g., aluminium, copper, magnesium, axle, etc.) provides stable cutting.

II. Four Core Strengths

1. Cutting sharp, not fragileThe full series uses high-strength resin bindings and preferred modifications, which are self-absorbed, easily cut, unblocked and uncracked over a long period of time, and reduce the risk of a fall.

2. Thermalally light-impacted, protecting primitive tissuesSharp cutting is associated with a reasonable linear velocity (label 60 m/s), the cutting process is less hot and the separation of samples from the parent body does not cause organizational change and ensures that subsequent gold observations are credible and credible.

3. Long and long dyslexic life and efficient cuttingThe high-strength resin mix of preferred specialty grinders, with long cut life and low unit cost, can significantly reduce the frequency of retweeting and improve the efficiency of the laboratory system as a whole compared to the normal cut.

4. stainless steel hole + set size and secure installationThe centre hole is reinforced with stainless steel hole rings, which do not slide and move; the outer diameter, thickness, inner diameter and commons are strictly controlled and fit with the gold-synthesis cutter of the various models.

Full-specifier coverage and support for customization

LWA series covers the common machine calibres from 100 mm to 500 mm, and meets different scenarios of laboratory fine-scrutinization to the large sample of the workshop:

Table

The government has been working on the issue of the Internet.Cut sizes, grinding types, thickness and hardness can be customized to meet the requirements of the client material and machine type, helps clients to solve special specimens, special equipment adaptation challenges.

IV. One-stop gold-scraper procurement

Around"Cutting - embedded - grinding - corrosive"Complete sample process, with Fuyun testing providing a mix of consumables to facilitate customer harmonization of procurement and control:

• Gold Cutting Card (LWA series)· Zero-ferrous metal is closely circumcised;
• Diamond suspension (PSD/MDS series): rough, fine, high-slipped;
• Hot Mounting Resin(a) Thermal solidification and embedding of various gold phasers;
• Embedded sample folder (PCP2): Three-bar support Q, thin, small specimens vertically unfailing;
• Gold Sand Paper / Ploting Scroll: dry grinding, wet grinding multiple-particle coverage.

The plant is well-sold, stocked, and can be connected to either a single-good supplement or a whole-line procurement.

V. ON Fuyun test

Fuyun Testing Technology (Shanghai) Co., Ltd. focuses on the field of gold-phased samples and materials for the detection of materials, with products covering the whole process of cutting, mossing, grinding, corrosion."High-quality selection, reliable quality, and support for customization"A stable supply of materials has been provided to a wide range of clients, including university laboratories, research institutes, motor vehicles/air/coloured enterprises quality screening centres.

If you need to select a type of proposal, test cut or customize, you are welcome to contact us for samples and technical support.